Setting up the SoClean Without a Heated Hose

Disconnect your CPAP hose from your CPAP machine. Position the injection fitting onto the port of your humidifier, allowing the smaller tubing to enter into the reservoir. The end of the tubing should rest on or near the bottom of the reservoir, over the heat plate. If necessary, carefully trim the end of the tubing in increments until it is the correct length. Now connect your CPAP hose to the

end of the injection fitting. Once installed, you do not need to disconnect the injection fitting to use your CPAP. You may leave the SoClean connected to your CPAP. You may operate the SoClean with or without water in the humidifier reservoir. The SoClean will disinfect any water in the humidifier reservoir, as long as the end of the injection tubing rests on or near the bottom of the reservoir and below the

water level. Contact us! Visit www.soclean.com Call 1-866-501-3705 Email support@soclean.com

See more here: https://www.youtube.com/watch?v=m_jBE32BrW8

Disconnect your CPAP hose from your CPAP machine. Position the injection fitting onto the port of your humidifier, allowing the smaller tubing to enter into the reservoir. The end of the tubing should rest on or near the bottom of the reservoir, over the heat plate. If necessary, carefully trim the end of the tubing in increments until it is the correct length. Now conn...